Columbus McKinnon
1-1/4" CM Alloy Orange Screw Pin Anchor Shackle 18 TON-M656AP
SKU: M656AP$230.22
View Details
Working Load Limit 18 TON
Factor 5:1
Origin USA
CM Alloy Anchor Shackles carry a strength rating about 50% higher than a carbon shackle of the same size, and about 25% higher than a Super Strong shackle, with a 5:1 design factor. Anchor shackles can be side loaded or used for multiple connections.
- Made in the USA from domestic Special Bar Quality (SBQ) steel
- Alloy quenched & tempered body and pin
- Shows major deformation before failure
- WLL and traceability code permanently marked on the body
- Meets the dimensional, marking and performance requirements of RR-C-271; screw pin and bolt type meet ASME B30.26
- Special testing and certification available at the time of order
Pin TypeSCREW PIN
MaterialALLOY STEEL, QUENCHED & TEMPERED
FinishORANGE POWDER COAT
Design Factor5 : 1
Size Range3/8" — 2"
WLL Range2 TON — 43 TON
StandardRR-C-271, ASME B30.26
OriginMANUFACTURED IN USA
Product CodeM656AP
DatasheetAlloy anchor shackles brochure PDF
Working Load Limits by Size
| Size (in) | WLL (ton) | Weight (lb) | Screw Pin # |
|---|---|---|---|
| 3/8 | 2 | 0.30 | M648AP |
| 7/16 | 2.6 | 0.50 | M649AP |
| 1/2 | 3.3 | 0.75 | M650AP |
| 5/8 | 5 | 1.30 | M651AP |
| 3/4 | 7 | 2.30 | M652AP |
| 7/8 | 9.5 | 3.50 | M653AP |
| 1 | 12.5 | 5.00 | M654AP |
| 1-1/8 | 15 | 7.00 | M655AP |
| 1-1/4 | 18 | 9.50 | M656AP |
| 1-3/8 | 21 | 12.50 | M666AP |
| 1-1/2 | 25 | 17.20 | M657AP |
| 1-5/8 | 29 | 23.50 | M685AP |
| 1-3/4 | 34 | 27.70 | M677AP |
| 2 | 43 | 39.00 | M658AP |
⚠
Never exceed the rated Working Load Limit. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.
5:1 DESIGN FACTOR │ ALLOY STEEL │ QUENCHED & TEMPERED Liftgear Houston, Texas