Columbus McKinnon
1-1/8" CM Alloy Bolt Type Anchor Shackle 15 TON-M855AG
SKU: M855AG$263.47
View Details
Working Load Limit 15 TON
Factor 5:1
Origin USA
CM Alloy Anchor Shackles carry a strength rating about 50% higher than a carbon shackle of the same size, and about 25% higher than a Super Strong shackle, with a 5:1 design factor. Anchor shackles can be side loaded or used for multiple connections.
- Made in the USA from domestic Special Bar Quality (SBQ) steel
- Alloy quenched & tempered body and pin
- Shows major deformation before failure
- WLL and traceability code permanently marked on the body
- Meets the dimensional, marking and performance requirements of RR-C-271; screw pin and bolt type meet ASME B30.26
- Special testing and certification available at the time of order
Pin TypeBOLT, NUT & COTTER
MaterialALLOY STEEL, QUENCHED & TEMPERED
FinishGALVANIZED
Design Factor5 : 1
Size Range3/8" — 2"
WLL Range2 TON — 50 TON
StandardRR-C-271, ASME B30.26
OriginMANUFACTURED IN USA
Product CodeM855AG
DatasheetAlloy anchor shackles brochure PDF
Working Load Limits by Size
| Size (in) | WLL (ton) | Weight (lb) | Bolt Type # |
|---|---|---|---|
| 3/8 | 2 | 0.30 | M848AG |
| 7/16 | 2.6 | 0.50 | M849AG |
| 1/2 | 3.3 | 0.75 | M850AG |
| 5/8 | 5 | 1.30 | M851AG |
| 3/4 | 7 | 2.30 | M852AG |
| 7/8 | 9.5 | 3.50 | M853AG |
| 1 | 12.5 | 5.00 | M854AG |
| 1-1/8 | 15 | 7.00 | M855AG |
| 1-1/4 | 18 | 9.50 | M856AG |
| 1-3/8 | 21 | 12.50 | M866AG |
| 1-1/2 | 30 | 17.20 | M857AG |
| 1-5/8 | 35 | 23.50 | M885AG |
| 1-3/4 | 40 | 27.70 | M877AG |
| 2 | 50 | 39.00 | M858AG |
⚠
Never exceed the rated Working Load Limit. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.
5:1 DESIGN FACTOR │ ALLOY STEEL │ QUENCHED & TEMPERED Liftgear Houston, Texas