Liftgear USA

1/2" TOG TRIPLE LEG DOMESTIC ALLOY CHAIN SLING G100 - WLL 39,000 LBS

SKU: 250-TOG-04
Qty:
Your rigging equipment is now smart, with CertFID.

Order Sheet

SKUSizeLengthPriceQty
250-TOG-041/2 in4FT$499.69
250-TOG-061/2 in6FT$546.28
250-TOG-081/2 in8FT$592.87
250-TOG-101/2 in10FT$639.46
250-TOG-121/2 in12FT$686.05
250-TOG-141/2 in14FT$732.64
250-TOG-161/2 in16FT$779.23
250-TOG-181/2 in18FT$825.82
250-TOG-201/2 in20FT$872.41
250-TOG-04$499.69
Size: 1/2 inLength: 4FT
250-TOG-06$546.28
Size: 1/2 inLength: 6FT
250-TOG-08$592.87
Size: 1/2 inLength: 8FT
250-TOG-10$639.46
Size: 1/2 inLength: 10FT
250-TOG-12$686.05
Size: 1/2 inLength: 12FT
250-TOG-14$732.64
Size: 1/2 inLength: 14FT
250-TOG-16$779.23
Size: 1/2 inLength: 16FT
250-TOG-18$825.82
Size: 1/2 inLength: 18FT
250-TOG-20$872.41
Size: 1/2 inLength: 20FT
WLL Up To 58,700 LB
Design Factor 4:1
Configuration Triple
G100 TRIPLE LEG CHAIN SLING · MASTER LINK / SUB-ASSEMBLY · 9/32″–5/8″ · MADE IN USA CHAIN

Liftgear Grade 100 Triple Leg Chain Slings share the load across three legs for stable lifts on round, triangular, or three-point loads. A master link with sub-assembly joins all three legs at the top, with end fittings matched to your configuration on each leg. Assembled with premium Grade 100 alloy steel chain made in the USA, then serialized, tagged, and RFID-enabled for asset tracking and inspection compliance. Available in four chain sizes — find the size and capacity you need below.

  • Premium Grade 100 alloy steel chain — made in the USA 🇺🇸
  • Metal tag with size, reach, capacity, and individual serial number
  • Overhead lifting
  • Built-in CertFID RFID technology for asset management and safety compliance
  • 4:1 design factor
Chain Grade100 ALLOY STEEL
Configuration3-LEG (TRIPLE)
Master LinkMASTER LINK / SUB-ASSEMBLY
Chain Sizes9/32″ · 3/8″ · 1/2″ · 5/8″
Design Factor4:1
Chain OriginMADE IN USA
IdentificationSERIALIZED METAL TAG
Asset TrackingBUILT-IN RFID (CERTFID)
RatingOVERHEAD LIFTING

Triple-Leg Working Load Limit (lbs)

Chain Size mm 60° 45° 30°
9/32″ 7 11,200 9,100 6,400
3/8″ 10 22,900 18,700 13,200
1/2″ 13 39,000 31,800 22,500
5/8″ 16 58,700 47,900 33,900

Never exceed the Working Load Limit. Rated capacity varies with sling angle — WLL decreases as the angle from horizontal decreases. Inspect before every use and remove from service if worn, deformed, cracked, or damaged. Always follow your domestic safety regulations.


ASME B30.9 · GRADE 100 · 4:1 DESIGN FACTOR · MADE IN USA CHAIN Liftgear Houston, Texas

No documents available for this product.