Skip to content
+1 (888) R1GGING
CM alloy bolt type anchor shackle, galvanized

Image may not match exactly. Refer to the specs.

Schematic

CM 1-3/4" Alloy Bolt Type Anchor Shackle – 80,000 lb WLL – M877AG

SKU M877AG

$1,551.37

Use it with

Details

Working Load Limit 40 TON
Factor 5:1
Origin USA
ALLOY BOLT TYPE ANCHOR SHACKLE — GALVANIZED

CM Alloy Anchor Shackles carry a strength rating about 50% higher than a carbon shackle of the same size, and about 25% higher than a Super Strong shackle, with a 5:1 design factor. Anchor shackles can be side loaded or used for multiple connections.

  • Made in the USA from domestic Special Bar Quality (SBQ) steel
  • Alloy quenched & tempered body and pin
  • Shows major deformation before failure
  • WLL and traceability code permanently marked on the body
  • Meets the dimensional, marking and performance requirements of RR-C-271; screw pin and bolt type meet ASME B30.26
  • Special testing and certification available at the time of order
Pin TypeBOLT, NUT & COTTER
MaterialALLOY STEEL, QUENCHED & TEMPERED
FinishGALVANIZED
Design Factor5 : 1
Size Range3/8" — 2"
WLL Range2 TON — 50 TON
StandardRR-C-271, ASME B30.26
OriginMANUFACTURED IN USA
Product CodeM877AG
DatasheetAlloy anchor shackles brochure PDF

Working Load Limits by Size

Size (in) WLL (ton) Weight (lb) Bolt Type #
3/8 2 0.30 M848AG
7/16 2.6 0.50 M849AG
1/2 3.3 0.75 M850AG
5/8 5 1.30 M851AG
3/4 7 2.30 M852AG
7/8 9.5 3.50 M853AG
1 12.5 5.00 M854AG
1-1/8 15 7.00 M855AG
1-1/4 18 9.50 M856AG
1-3/8 21 12.50 M866AG
1-1/2 30 17.20 M857AG
1-5/8 35 23.50 M885AG
1-3/4 40 27.70 M877AG
2 50 39.00 M858AG
⚠

Never exceed the rated Working Load Limit. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.

5:1 DESIGN FACTOR │ ALLOY STEEL │ QUENCHED & TEMPERED Liftgear Houston, Texas