Skip to content
CM alloy web sling shackle, bolt type with nut and linch pin, galvanized
Dimension drawing, CM alloy web sling shackle (P, D, L, W, R)

Image may not match exactly. Refer to the specs.

Schematic

CM 6" Alloy Bolt Type Web Sling Shackle – 22,500 lb WLL – M706A

SKU M706A

$230.30

Use it with

Details

Working Load Limit 11-1/4 TON
Factor 6:1
Webbing 6"
ALLOY WEB SLING SHACKLE — BOLT TYPE WITH LINCH PIN, GALVANIZED

CM Alloy Web Sling Shackles connect synthetic web slings to hooks, links and other lifting hardware, with a 6:1 design factor for higher ratings than carbon at the same webbing width. The sling rides on a long, straight bolt sized to the webbing width, so it lies flat and loads the whole pin. A nut and linch pin hold the bolt in place. This shackle fits 6" webbing and is rated 22,500 lb (11-1/4 ton).

  • Alloy steel shackle, galvanized for longer life
  • Bolt and nut with linch pin secure the assembly
  • 6:1 design factor
  • Marked with working load limit (WLL) and size
  • Fits web slings from 3" to 6" wide
  • Made in the USA
Pin TypeBOLT, NUT & LINCH PIN
Fits Webbing6" WIDE
MaterialALLOY STEEL
FinishGALVANIZED
Design Factor6 : 1
Size Range3" — 6"
WLL Range6-3/4 TON — 11-1/4 TON
Made InUSA
Product CodeM706A
Replacement Pin2X8706A
Linch Pin5511

Working Load Limits & Dimensions by Size

Webbing (in) WLL (ton) WLL (lb) P (in) D (in) L (in) W (in) R (in) Weight (lb) Product #
3 6-3/4 13,500 0.88 0.75 3.25 3.00 1.88 3.01 M703A
4 7-1/4 14,500 0.88 0.75 3.75 4.00 1.88 3.16 M704A
5 9-1/2 19,000 1.00 1.00 4.25 5.00 2.38 6.04 M705A
6 11-1/4 22,500 1.13 1.13 4.75 6.00 2.63 9.02 M706A
⚠

Never exceed the rated Working Load Limit. Do not point load: spread the load across the whole pin to reach the full working load limit. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.


6:1 DESIGN FACTOR │ ALLOY │ GALVANIZED Liftgear Houston, Texas