Image may not match exactly. Refer to the specs.
Schematic
Liftgear Lever Load Binder, 5/16"-3/8" Chain – 6,600 lb WLL – ADV-LBNDR7100I
SKU ADV-LBNDR7100I
$44.99
Returns need our approval first. Return policy
Use it with
Liftgear 1/2" Grade 70 Binder Chain with Grab HooksWLL 11,300 lb$87.99
Cinch Rite 2" x 27 ft Ratchet Strap with Flat Hooks – 3,500 lb WLL – 227-7189G$23.00- Liftgear 3/8" Grade 70 Binder Chain with Grab HooksWLL 6,600 lb$46.99
Cinch Rite 2" x 27 ft Ratchet Strap with Wire Hooks – 3,500 lb WLL – 227-7089G$20.00
Details
The classic over-center lever binder for 5/16"-3/8" chain. One pull of the handle tensions the chain and locks it; quick to set and release when loads change often.
- All load bearing fittings are forged.
- Quenched and tempered.
- Entire assembly is powder coated.
- Hooks have 360° rotation.
Sizes & Specifications
| Part # | Chain size | WLL (lb) | Weight (lb) |
|---|---|---|---|
| ADV-LBNDR7100I | 5/16" Grade 70, 3/8" Grade 70 | 6,600 | 7 |
Never exceed the rated Working Load Limit. Lever binders are under tension and inherently dangerous; only qualified, trained persons should use them. Keep your body clear of the handle while tensioning, as it may recoil or whip rapidly. Never operate a binder while standing on the load. A tie-down is only as strong as its weakest part: chain, binder, strap, hook and anchor point must each be rated for the load. Always follow applicable federal and state cargo securement regulations. Inspect before every use — remove from service if deformed, worn, or damaged.