M&W Spreader Beam End Cap Kit, End cap kit (pair) for 2-1/2" A53 Grade B Sch 40 pipe
SKU MW-19499
$1,401.77
Returns need our approval first. Return policy
Details
Working Load Limit, up to 39 TON
Proof TESTED
Made USA
End cap kits that turn A53 Grade B Schedule 40 pipe into a spreader beam. The rating depends on the pipe and the spread (chart below). Kits are sold in pairs with retaining bolts, capacity tags and proof load certificates. The pipe is sold separately, or order a complete beam assembled to length.
- Manufactured to exceed all ASME B30.20 and OSHA regulations when assembled to specifications using A53 Grade B Schedule 40 pipe.
- Painted safety yellow for increased visibility.
- Individually proof loaded per OSHA requirements and shipped with certification paperwork.
- Durable construction ideally suited to jobsite or warehouse use.
- Made in U.S.A.
- Top rigging available — call for details.
- Custom designs available — call for engineering.
- Minimum horizontal top rigging angle of 45° — The manufacturer recommends a minimum angle of 60°.
ConnectionsSHACKLE SIZES IN TABLE
Top RiggingSOLD SEPARATELY
FinishSAFETY YELLOW
StandardASME B30.20
CertificatePROOF LOAD CERTIFICATION INCLUDED
Made InUSA
Part NumbersMW-19499, MW-19500, MW-19120
DatasheetSpecification sheet PDF
MW-19499 specifications
| Specification | Value |
|---|---|
| Pipe Size | 2-1/2” |
| Pipe spec | A53 Grade B, Schedule 40 (sold separately; can be supplied by the manufacturer - call for quote) |
| Pipe nominal size (technical information) | 2-1/2” nominal |
| A53 Grade B Schedule 40 (pipe table) | 2 1/2" |
| Top Shackle Min | 1/2” |
| Top Shackle Max | 7/8” |
| Bottom Shackle Min | 1/2” |
| Bottom Shackle Max | 7/8” |
| Weight per Pair (lbs) | 28 |
| A | 2.75 |
| B | 4 |
| DIA C | 0.69 |
| Tube length | TUBE LENGTH = DESIRED SPREAD - (A+A) |
| Retaining bolt | Grade 8 hex head cap screw 5/8”-11 with a length of 4-1/2” |
| Sold as | Pair (each kit complete with retaining bolts, capacity tags, and individual proof load certifications; proof tested and serial numbered in pairs) |
| Complete assembled beam part number format | 19499-<spread in inches, inferred> (only catalog example: 19120-120 = 10' beam) |
| Top rigging angle | Minimum horizontal 45°; the manufacturer recommends minimum 60° |
MW-19500 specifications
| Specification | Value |
|---|---|
| Pipe Size | 5” |
| Pipe spec | A53 Grade B, Schedule 40 (sold separately; can be supplied by the manufacturer - call for quote) |
| Pipe nominal size (technical information) | 5” nominal |
| A53 Grade B Schedule 40 (pipe table) | 5" |
| Top Shackle Min | 3/4” |
| Top Shackle Max | 1-1/4” |
| Bottom Shackle Min | 3/4” |
| Bottom Shackle Max | 1-1/4” |
| Weight per Pair (lbs) | 50 |
| A | 3.25 |
| B | 4 |
| DIA C | 0.69 |
| Tube length | TUBE LENGTH = DESIRED SPREAD - (A+A) |
| Retaining bolt | Grade 8 hex head cap screw 5/8”-11 with a length of 8” |
| Sold as | Pair (each kit complete with retaining bolts, capacity tags, and individual proof load certifications; proof tested and serial numbered in pairs) |
| Complete assembled beam part number format | 19500-<spread in inches, inferred> (only catalog example: 19120-120 = 10' beam) |
| Top rigging angle | Minimum horizontal 45°; the manufacturer recommends minimum 60° |
MW-19120 specifications
| Specification | Value |
|---|---|
| Pipe Size | 8” |
| Pipe spec | A53 Grade B, Schedule 40 (sold separately; can be supplied by the manufacturer - call for quote) |
| Pipe nominal size (technical information) | 8” nominal |
| A53 Grade B Schedule 40 (pipe table) | 8" |
| Top Shackle Min | 1” |
| Top Shackle Max | 1-3/4” |
| Bottom Shackle Min | 1” |
| Bottom Shackle Max | 1-1/2” |
| Weight per Pair (lbs) | 288 |
| A | 7 |
| B | 6 |
| DIA C | 1.06 |
| Tube length | TUBE LENGTH = DESIRED SPREAD - (A+A) |
| Retaining bolt | Grade 8 hex head cap screw 1”-8 with a length of 11-1/2” |
| Sold as | Pair (each kit complete with retaining bolts, capacity tags, and individual proof load certifications; proof tested and serial numbered in pairs) |
| Complete assembled beam part number format | 19120-<spread in inches, inferred> (only catalog example: 19120-120 = 10' beam) |
| Top rigging angle | Minimum horizontal 45°; the manufacturer recommends minimum 60° |
Working Load Limit by Outside Spread (lb)
| Outside spread | MW-19499 | MW-19500 | MW-19120 |
|---|---|---|---|
| 4 ft | 15,000 | 34,000 | 78,000 |
| 5 ft | 14,000 | 34,000 | 78,000 |
| 6 ft | 13,000 | 34,000 | 78,000 |
| 8 ft | 11,000 | 34,000 | 78,000 |
| 10 ft | 8000 | 34,000 | 78,000 |
| 12 ft | 5800 | 32,000 | 76,000 |
| 14 ft | 4000 | 30,000 | 76,000 |
| 15 ft | 3000 | 28,000 | 72,000 |
| 16 ft | — | 26,000 | 70,000 |
| 18 ft | — | 24,000 | 66,000 |
| 20 ft | — | 20,000 | 62,000 |
| 22 ft | — | 16,000 | 58,000 |
| 24 ft | — | 14,000 | 54,000 |
| 26 ft | — | 12,000 | 50,000 |
| 28 ft | — | 10,000 | 46,000 |
| 30 ft | — | 9000 | 42,000 |
| 32 ft | — | — | 38,000 |
| 34 ft | — | — | 32,000 |
| 36 ft | — | — | 30,000 |
Notes
- Pipe Sold Separately.
- Minimum horizontal top rigging angle is 45° on all fixed and adjustable spreaders. The manufacturer recommends a minimum horizontal top rigging angle of 60°.
- Sold without pipe.
- PIPE CAN BE SUPPLIED BY the manufacturer CALL FOR QUOTE.
- Tube length = desired spread — (a+a).
- ORDERING INFORMATION: End cap kits are sold in pairs for models 19499, 19500 and 19120. Each cap kit comes complete with retaining bolts, capacity tags, and individual proof load certifications. End cap kits are proof tested and serial numbered in pairs.
- ORDERING INFORMATION: Complete spreader beams can be ordered from the chart above in standard lengths. For example, a 10’ spreader beam with 39 tons Working Load Limit capacity would use the 19120 end cap kits and would be supplied assembled with the proper A53 Grade B, Schedule 40 pipe. The pipe would also be tagged and serial numbered. From the chart above, the user would order part number 19120-120. Complete spreader beams are also shipped with individual proof load certification paperwork.
- TECHNICAL INFORMATION: End cap kits are designed for use with A53 Grade B, Schedule 40 pipe between the end fittings and must have no weld joint irregularities. This steel pipe is widely available, and also available from the manufacturer. The model 19499 uses a 2-1/2” nominal size pipe, the 19500 uses a 5” nominal size pipe and the 19120 uses an 8” nominal size pipe.
- TECHNICAL INFORMATION: Lengths of pipe between end cap kits must be straight to within +/- 1/8” from each end, and ends of pipe should be cut squarely and cleanly from the centerline of the pipe. Lengths of pipe should be free from any factory defects, irregularities, or damage.
- TECHNICAL INFORMATION: Each end of the length of pipe must have the correct diameter holes drilled through both ends and in proper alignment through both walls of the pipe. The model 19499 uses a Grade 8 hex head cap screw 5/8”-11 with a length of 4-1/2”. The model 19500 uses a Grade 8 hex head cap screw 5/8”-11 with a length of 8”. The model 19120 uses a Grade 8 hex head cap screw 1”-8 with a length of 11-1/2”.
⚠
Never exceed the rated Working Load Limit. Rig the top at no less than 45° from horizontal; 60° is recommended. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.
California Proposition 65 warning: The steel and alloy steel in this product contains chromium and nickel. This product can expose you to chemicals including nickel and chromium, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Normal handling and use of this product is not generally an exposure concern; grinding, sanding, welding and similar work can expose you to these chemicals.
ASME B30.20 │ PROOF TESTED │ MADE IN USA Liftgear Houston, Texas