Skip to content
+1 (888) R1GGING
Fixed Spread Spreader Beam, Large Capacity Shackle End, 150,000 lb WLL

Image may not match exactly. Refer to the specs.

Schematic

View schematicPDF · 2026

M&W Fixed Spread Spreader Beam, Large Capacity Shackle End, WLL 150,000 lb, 10 ft fixed spread

SKU MW-24500

$12,146.64

Spread
4 ft fixed spread6 ft fixed spread8 ft fixed spread10 ft fixed spread12 ft fixed spread16 ft fixed spread20 ft fixed spread25 ft fixed spread30 ft fixed spread

Returns need our approval first. Return policy

Use it with

Details

Working Load Limit 75 TON
Proof TESTED
Made USA
LARGE CAPACITY FIXED SPREAD SPREADER BEAM — SHACKLE ENDS

A large capacity spreader beam at one fixed spread, 40,000 to 150,000 lb. Beam only: the shackles (size in the table) and top rigging are by others or sold separately.

  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Painted safety yellow for increased visibility.
  • Individually proof loaded per OSHA requirements and shipped with certification paperwork.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Custom designs available — call for engineering.
Capacity150,000 LB (75 TON)
ConnectionsSHACKLE ENDS — SHACKLES BY OTHERS (SIZE IN TABLE)
Top RiggingSOLD SEPARATELY
FinishSAFETY YELLOW
StandardASME B30.20
CertificatePROOF LOAD CERTIFICATION INCLUDED
Made InUSA
Part NumbersMW-24503, MW-24502, MW-24501, MW-24500, MW-24499, MW-24498, MW-24497, MW-24487, MW-24488
DatasheetSpecification sheet PDF

Sizes & Specifications

Part # Outside Spread (L) ft Shackle Size Headroom (in) Weight (lbs)
MW-24503 4 2-1/2” Top, 2-1/2” Bottom 15 820
MW-24502 6 2-1/2” Top, 2-1/2” Bottom 15 968
MW-24501 8 2-1/2” Top, 2-1/2” Bottom 15 1116
MW-24500 10 2-1/2” Top, 2-1/2” Bottom 15 1264
MW-24499 12 2-1/2” Top, 2-1/2” Bottom 15 1412
MW-24498 16 2-1/2” Top, 2-1/2” Bottom 15 1707
MW-24497 20 2-1/2” Top, 2-1/2” Bottom 15 2008
MW-24487 25 2-1/2” Top, 2-1/2” Bottom 15 2371
MW-24488 30 2-1/2” Top, 2-1/2” Bottom 15 2740

Notes

  • Minimum horizontal top rigging angle is 45° on all fixed and adjustable spreaders. The manufacturer recommends a minimum horizontal top rigging angle of 60°.
⚠

Never exceed the rated Working Load Limit. Rig the top at no less than 45° from horizontal; 60° is recommended. Always follow applicable domestic safety regulations. Inspect before every use — remove from service if deformed, worn, or damaged.

California Proposition 65 warning: The steel and alloy steel in this product contains chromium and nickel. This product can expose you to chemicals including nickel and chromium, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Normal handling and use of this product is not generally an exposure concern; grinding, sanding, welding and similar work can expose you to these chemicals.

ASME B30.20 │ PROOF TESTED │ MADE IN USA Liftgear Houston, Texas