Image may not match exactly. Refer to the specs.
Schematic
Liftgear 1/2" Grade 70 Binder Chain with Grab Hooks, WLL 11,300 lb, 20'
SKU ADV-G70BC500X20I
$151.99
Use it with
CM Super Strong 3/4" Screw Pin Anchor Shackle – 13,000 lb WLL – M652G$63.93
Liftex Supertechlon ST-ENR-12000 Endless Round Sling, TanWLL 12,000 lb$14.72
Green Pin P-6703A Swivel Hoist Hook with Safety Latch – 11,900 lb (5.4 tonnes) WLL – HKK03A054$145.62
Green Pin 7/8" Bolt Type Shackle – 14,330 lb (6.5 tonnes) WLL – GPGHMB22$57.78
Details
Working Load Limit 5.7 TON
Grade 70
Finish YELLOW
1/2" Grade 70 transport chain with a clevis grab hook on each end, the standard tie-down for equipment and steel on flatbeds. Pair it with a binder rated for the same chain size.
- Every link has been proof tested to 2 times the working load.
- Grade 70 transport chain is used when higher working loads or DOT regulations require stronger chain.
- DOT compliant.
- Clevis grab hook on each end.
- Yellow zinc finish.
- Not suitable for overhead lifting.
Capacity11,300 LB (5.7 TON) WLL
Chain Size1/2"
GradeG70 TRANSPORT
HooksCLEVIS GRAB, BOTH ENDS
FinishYELLOW ZINC
Proof Test2× WLL, EVERY LINK
Sizes & Specifications
| Part # | Size | WLL (lb) | Weight (lb) |
|---|---|---|---|
| ADV-G70BC500X10I | 1/2" x 10' | 11,300 | 46 |
| ADV-G70BC500X20I | 1/2" x 20' | 11,300 | 52 |
| ADV-G70BC500X25K | 1/2" x 25' | 11,300 | 65 |
⚠
Never exceed the rated Working Load Limit. Not for overhead lifting. A tie-down is only as strong as its weakest part: chain, binder, strap, hook and anchor point must each be rated for the load. Always follow applicable federal and state cargo securement regulations. Inspect before every use — remove from service if deformed, worn, or damaged.
CARGO CONTROL │ DOT COMPLIANT │ GRADE 70 Liftgear Houston, Texas