Skip to content
+1 (888) R1GGING
1/2" Grade 70 Binder Chain with Grab Hooks, 11,300 lb WLL

Image may not match exactly. Refer to the specs.

Schematic

Liftgear 5/16" Grade 70 Binder Chain with Grab Hooks, WLL 4,700 lb, 20'

SKU ADV-G70BC312X20I

$54.99

Length
16'20'25'

Use it with

Details

Working Load Limit 2.4 TON
Grade 70
Finish YELLOW
5/16" GRADE 70 TRANSPORT CHAIN — CLEVIS GRAB HOOK EACH END

5/16" Grade 70 transport chain with a clevis grab hook on each end, the standard tie-down for equipment and steel on flatbeds. Pair it with a binder rated for the same chain size.

  • Every link has been proof tested to 2 times the working load.
  • Grade 70 transport chain is used when higher working loads or DOT regulations require stronger chain.
  • DOT compliant.
  • Clevis grab hook on each end.
  • Yellow zinc finish.
  • Not suitable for overhead lifting.
Capacity4,700 LB (2.4 TON) WLL
Chain Size5/16"
GradeG70 TRANSPORT
HooksCLEVIS GRAB, BOTH ENDS
FinishYELLOW ZINC
Proof Test2× WLL, EVERY LINK

Sizes & Specifications

Part # Size WLL (lb) Weight (lb)
ADV-G70BC312X16I 5/16" x 16' 4,700 16
ADV-G70BC312X20I 5/16" x 20' 4,700 23
ADV-G70BC312X25K 5/16" x 25' 4,700 26
⚠

Never exceed the rated Working Load Limit. Not for overhead lifting. A tie-down is only as strong as its weakest part: chain, binder, strap, hook and anchor point must each be rated for the load. Always follow applicable federal and state cargo securement regulations. Inspect before every use — remove from service if deformed, worn, or damaged.

CARGO CONTROL │ DOT COMPLIANT │ GRADE 70 Liftgear Houston, Texas